HP LaserJet Pro MFP - Copy an identification card

HP LaserJet Pro MFP - Copy an identification card

Learn how to copy both sides of an ID card, or other small-sized documents, onto the same side of one sheet of paper.

NOTE:

The steps vary according to the type of control panel.

TOUCHSCREEN WITH BLACK BACKGROUND

Find your printer control-panel type in the options below and then follow the steps to copy an identification card.

Touchscreen control panel with white background

Follow these steps for LaserJet Pro MFP models that have a touchscreen control panel with a white background.

In addition to the steps below, you can view the following video of how to copy an ID card (on a printer that has a touchscreen control panel with a white background).

  1. Place the ID card onto the scanner glass, near the icon in the rear left corner, and slightly away from the edges of the scanner glass.

  2. Close the scanner lid.

  3. From the Home screen on the printer control panel, touch the Copy icon.

  4. Touch the ID Card icon.

  5. Select the copy orientation and tray settings, and then touch Copy.

  6. Follow the prompts on the control panel screen to copy the first side of the ID card and then turn the card over to copy the other side.

Touchscreen control panel with black background

Follow these steps for LaserJet Pro MFP models that have a touchscreen control panel with a black background.

TOUCHSCREEN WITH BLACK BACKGROUND

In addition to the steps below, you can view the following video of how to copy an ID card (on a printer that has a touchscreen control panel with a black background).

  1. Place the ID card (or other small-sized document) on the rear left corner of the scanner glass.

    PLACE ID CARD ON SCANNER GLASS

  2. Close the scanner lid.

  3. From the Home screen on the printer control panel, touch the Copy button.

  4. Touch the ID Copy button.

  5. Touch the Start Copy button to start copying.

  6. The printer prompts you to turn over the ID card (or small document) and place it on a different section of the scanner glass.

    TURN ID CARD OVER ON SCANNER GLASS

  7. Touch the OK button if you have additional pages to copy (such as in a small booklet), or touch the Done button if this is the last page.

    The printer copies both sides of the ID card (or all pages of a small booklet) and prints them onto one side of a sheet of paper.

https://support.hp.com/

Comments

Post a Comment

Popular posts from this blog

Laserjet Pro MFP M428fdw - Wi-Fi connection is lost after router or network settings change

Image
Laserjet Pro MFP M428fdw - Wi-Fi connection is lost after router or network settings change Reconnect a previously installed printer to the Wi-Fi network if you purchased a new router, changed your Internet Service Provider (ISP), or changed your network name and password. Connect a printer with a touchscreen control panel Use the printer control panel to connect your printer to your network. Connect the printer to the Wi-Fi network (printers with a touchscreen) Use the Wireless Setup Wizard from the printer control panel to connect the printer to your Wi-Fi network. Place the printer near the network router. Make sure paper is loaded in the main tray, and then turn on the printer. ...
Read more